Configuring The E1 Port - Paradyne ENE2000-P Installation Instructions Manual

Configuring the E1 Port

Configuration Switches are numbered from left to right, 1–8.
Table 1. Configuration Switch Settings
ENE2000-P Provider
Configuration Switches
Switch Port 1
1 Speed
2
3 Frame Type
4 Line Code
5 Not used
6 Not used
7 Timing
8 Not used
ENE2000-S Subscriber
Configuration Switches
Port 1
Not used. The ENE2000-S
determines speed via
communication with its partner E1
provider unit.
Frame Type
Line Code
Not used
Not used
Not used. The ENE2000-S
determines timing via
communication with its partner E1
provider unit
Not used
5