Maintain And Service Kp8 And Kp8F; Maintenance And Care - Siemens SIMATIC HMI KP Series Operating Instructions Manual

Maintain and service KP8 and KP8F

8.1

Maintenance and care

Observe the safety instructions during maintenance and care found in chapter "Safety
Instructions (Page 19)".
Scope of maintenance
The HMI device is designed for maintenance-free operation. Cyclic maintenance work is not
required.
Scope of care
The scope of care includes:
● Cleaning keyboard overlay
Cleaning procedure
CAUTION
Damage possible
Using compressed air or steam cleaners, or aggressive solutions or scouring agents will
damage the HMI device.
Use a cleaning cloth dampened with a cleaning agent to clean the equipment. Only use
water with a little liquid soap or a screen cleaning foam.
Proceed as follows:
1. Switch off the HMI device.
2. Spray the cleaning solution onto a cleaning cloth.
Do not spray directly onto the HMI device.
3. Clean the HMI device.
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
8
81