Electrolux EW7T3733BA User Manual page 26

2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Départ/Pause
again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button Marche/Arrêt to cancel
the programme and to deactivate the
appliance.
2. Press the button Marche/Arrêt again to
activate the appliance.
If the SensiCare System has completed
and the water filling has already started,
the new programme starts without
repeating the SensiCare System. The
water and the detergent are not drained
out in order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20 minutes
after the starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
11.11 Opening the lid - Adding
garments
If the temperature and level of the water
in the drum are too high and/or the drum
is still rotating you should not open the
lid.
While a programme or the delay start
operates, the appliance lid is locked. The
display shows the indicator
1. Touch the Départ/Pause
In the display the related lid lock indicator
goes off.
2. Open the appliance lid and drum doors. If
necessary, add or remove the items.
26 ENGLISH
The programme or the delay start continues.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Départ/Pause
goes off.
The lid unlocks and the indicator
off.
1. Press button Marche/Arrêt to deactivate
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display shows the end of the previous
programme. Turn the programme dial to
set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the lid and the drum door ajar to
5. Close the water tap.
11.13 Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The time area shows
• The drum still turns at regular intervals to
• The lid stays locked.
• You must drain the water to open the lid:
.
1. If necessary, touch the Essorage button
button.
2. Press the Départ/Pause button:
Close the drum door and lid. Touch the
Départ/Pause button.
the appliance.
prevent mildew and odours.
display shows the lid locked
prevent creases in the laundry.
to decrease the spin speed proposed by
the appliance.
• If you have set Rinse Hold
appliance drains the water and spins.
button
goes
and the
.
the