Advertisement
Quick Links
CROSSWAVE
MULTI-SURFACE HARD FLOOR CLEANER
3882, 3883 SERIES
Quick Start Guide
1 Get Ready
Assemble and charge machine (pg 5). If wet cleaning, fill the clean
water tank (pg 7).
2 Choose Your Cleaning Mode
Press power button (C) to turn on and select either Power Vac or
Power Mop using mode button (B) on display (D). When using both
modes in one session, begin with Power Vac Mode for dry cleaning;
parts need 24 hours to dry after using Power Mop Mode.
Power Vac Mode
Perfect for everyday messes like
pet hair, crumbs, and dry debris
on hard floors and area rugs.
3 Start Cleaning
Recline machine by placing your foot on its foot to start
brush roll spinning and begin cleaning.
For larger messes and area rugs, switch to Turbo
Mode (A) for additional cleaning fluid and suction.
Cleaning Tips
• For best results, use on hard floors and large/heavy area rugs. Follow
manufacturer's instructions for small/lightweight rugs.
• If planning to store for over 6 months, ensure the battery is fully charged
before storage.
• Scan the QR code for product videos, tips, and support.
OMNIFORCE
®
Power Mop Mode
Save time and vacuum and mop
together. Clean wet and dry
messes from mud to spills.
™
A
B
C
D
Advertisement
Related Manuals for Bissell CROSSWAVE OMNIFORCE 3882 Series
Summary of Contents for Bissell CROSSWAVE OMNIFORCE 3882 Series
- Page 1 CROSSWAVE OMNIFORCE ® ™ MULTI-SURFACE HARD FLOOR CLEANER 3882, 3883 SERIES Quick Start Guide 1 Get Ready Assemble and charge machine (pg 5). If wet cleaning, fill the clean water tank (pg 7). 2 Choose Your Cleaning Mode Press power button (C) to turn on and select either Power Vac or Power Mop using mode button (B) on display (D).
-
Page 2: Important Safety Instructions
See the “Power Mop Mode” fire, explosion or risk of injury. section of the User Guide for approved BISSELL formulas. • Do not expose battery pack or appliance to fire or excessive • Do not allow to be used as a toy. Close attention is necessary when temperature. -
Page 3: Table Of Contents
Warranty Limited 2-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information. NOTICE Disconnecting the battery will destroy the appliance and invalidate the warranty. -
Page 4: Product Overview
1. Dirty Tank Full 2. Error Indicator 3. Charging 4. Low Battery 5. Battery % Remaining 6. Clog Detected 7. Suction Level 8. Fluid Level 9. Brush Roll Stuck 10. Clean-Out Cycle Indicator 11. Clean Tank Empty 4 BISSELL.com... -
Page 5: Assembly & Charging The Battery
Let charge for 4 hours or until battery reaches 100% charge. WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine. BISSELL.com 5... -
Page 6: Power Vac Mode
7. Pull the strainer tab up and 8. Replace strainer and dirty 9. Insert bottom of tank first. remove debris. Empty tank tank lid. Tilt tank towards machine until into trash can. it clicks into place. 6 BISSELL.com... -
Page 7: Power Mop Mode
Power Mop Mode This machine is compatible with BISSELL® bare floor formulas*. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine. Scan the QR code or visit BISSELL.com for formulas. Note: When using both modes in one session, begin with Power Vac Mode for dry cleaning;... - Page 8 Power Mop Mode (continued) Sanitizing Hard Floors BISSELL Hard Floor Sanitize formula is for use on hard, sealed floors only. Do not use on carpet or area rugs. Read formula container label fully prior to use. 1. Follow cleaning instructions on page 7 to 2.
-
Page 9: Using The Clean-Out Cycle
Note: If brush roll is still dirty, it can be hand washed with mild detergent and place in brush roll holder on charging tray to dry. For best results, replace brush roll every 3 months. BISSELL.com 9... -
Page 10: After-Cleaning Care
Tilt tank locked in place. machine. Press down until towards machine until it clicks window clicks into place. into place. Note: Any other maintenance or servicing not included in this manual should be performed by an authorized service representative. 10 BISSELL.com... -
Page 11: Troubleshooting
Remove any accumulated hair from brush roll. Fan error Contact BISSELL Consumer Care. Battery communication error Contact BISSELL Consumer Care. The battery is to be disposed of safely. See support.BISSELL.com for battery removal instructions. BISSELL.com 11... - Page 12 We’re Waggin’ Our Tails! BISSELL proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL® product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.