Page 1
My CrossWave HF3 brush is not turning | Support CrossWave HF3™ Cordless Multi-Surface Wet Dry Vac Clean brush roll Turn machine OFF • Remove brush roll cover > Pinch tabs and lift up • Remove brush roll > Pull tab on right of brush roll...
Page 2
Clean brush roll area with cloth or brush • Ensure all wrapping & debris on ends of brush roll is removed • Test brush roll for damage • Hold brush roll by end tab Spin brush roll Brush should spin several times with one flick If brush roll does not spin freely >...
Page 3
Reinstall parts Replace brush roll > Insert end without tab into machine • Then press end with tab into place • Install brush roll window • Ensure there is NO space between cover & foot If there is a space here > Suction will be impacted Press down on front of window until you hear a click...