Configuration Table - Paradyne COMSPHERE 3810 User Manual Supplement

COMSPHERE 3800 Series Modems

Configuration Table

Table 3-1
Japan or new with the firmware release of the modem accompanying this document.
Factory Defaults
Factory Default Templates for Cellular
If Enhanced Throughput Cellular (ETC) is installed, the AT command &F5 or the front
panel selection Cellular (Mobile) sets the following configuration options:
Option
Maximum Frame Size
Error Control Mode
Auto-Answer Rings
No Answer Timeout
No Carrier Disconnect
V.32bis Train
V.32bis Autorate
V.42 ARQ Window Size
Cellular Enhancements
If ETC is installed, the AT command &F6 or the front panel selection Cellular (PSTN) sets
the following
configuration options:
Option
Transmit Level
Error Control Mode
No Answer Timeout
No Carrier Disconnect
V.32bis Train
V.42 ARQ Window Size
Cellular Enhancements
3-2
describes configuration options that are different for 3800 Series modems installed in
Configuration Options for Japan
AT Command Value
\A4
\N4
S0=3
S7=45
S10=100
S43=1
S76=3
S89=9
S91=1
AT Command Value
&I15
\N4
S7=45
S10=100
S43=1
S89=9
S91=17
September 1998
Table 3-1
(1 of 3)
3810-A2-GB93-30