Advertisement
Switching between FM Stereo and
Mono
Generally, it is best to aliow the ARC
(Automatic Reception Contro!) function to
automatically set the optimum listening
conditions. When stereo broadcasting is re-
ceived, "CD" [26] will appear on the display.
When there is a large amount of noise, you
can press button @ in Bank [14] for clearer
mono reception ("MONO" [28] will appear
'on the display).
Preset Scan Tuning
This function lets you automatically moni-
tor the stations assigned to the preset but-
tons.
1,Press button @ in Bank [14]. The fre-
quency will appear on the display [38]
and the preset number [27] wiil blink.
Each station assigned to.the buttons in
Bank [4] (FM1: [4], [14]} will be automati-
cally tuned in for about 8 seconds.
2.When you hear a station that you like,
press button @ in Bank [14] again to can-
cel preset scan tuning and remain at that
station:
+ Stations stored in memory under the but-
tons [4], [14] but whose signal is weak
will not be recatied.
Using the Tape Deck
Parts Identification
Fig.1
[2] Fast Forward, Rewind/Music search
[3] Cassette door
{5} Eject
[10] Display
[12] Direction change/Release
[14] @ Flex (1/f)
{14] ® Dolby B NR
[14] @ Blank Skip (B. SKIP}
[14] @ Repeat (RPT)
Fig. 4
138] Flex (1/f)
(36] Blank Skip (B. SKIP}
(27] Metal
(38] Tape running direction indicator
{39] Play indicator
{40] Dolby B NR
About Cassette Tapes
+ Do not use tapes longer than C-90-type
(90 min.) cassettes. Longer tapes can in-
terfere with tape transport.
+ A loose or warped label on a cassette
tape may interfere with the eject mecha-
nism of the unit or cause the cassette to
become jammed in the unit. Avoid using
such tapes or remove such labels from
the cassette before attempting use.
+ Storing cassettes in areas directly ex-
posed to sunlight or high temperatures
can distort them and subsequently inter-
fere with tape transport. (Fig. 28)
Fig. 28
+ Store unused tapes in a tape case where
there is no danger of them becoming
loose or being exposed to dust.
Cleaning the Head
If the heads become dirty, the sound quality
will. deteriorate and there will be sound
dropouts and other imperfections in perfor-
mance. In this case, the head must be
cleaned.
+ When using a cleaning tape, play it once
on one side for normal cleaning.
Excessive use of the cleaning tape will in-
crease head wear.
Be sure to read the cleaning tape instruc-
tions before use.
7
Advertisement
