Model 3811 Modem Installation - Paradyne 3800 Supplement Manual

COMSPHERE 3800 Series Modems

Model 3811 Modem Installation

To install the Model 3811 modem (carrier card) into the COMSPHERE 3000 Series Carrier, follow
the same installation procedures described in the
Chapter 2. For correct power, DTE, dial, and leased-line cabling procedures, refer to the
COMSPHERE 3000 Series Carrier, Installation Manual.
Note that the Model 3811 supports the following features:
2-4
Carrier assembly
— 3000-B1-601 – COMSPHERE 3000 Series Carrier with 100 volt power supply
Network Interface Modules (NIMs)
— 3000-F1-003 – RJ21X NIM without the Make Busy and Service Line feature
— 3000-F1-010 – RJ21X NIM with the Make Busy feature
— 3000-F1-016 – RJ21X NIM with the Service Line feature
— 3000-F1-018 – RJ21X NIM with the Make Busy and Service Line features
Cables
— 3600-F2-503 – 50-pin to eight 8-position keyed modular plugs used for leased-line
networks
— 3600-F2-505 – 50-pin to eight 8-position keyed modular RJ45S plugs used with NIMs
for dial-line networks
November 1996
Model 3811 Modem Installation section in
3810-A2-GB93-20