Advertisement
1. Ignitor unit panel
2. Spare main fuse
3. Main fuse
3. Pull the ignitor unit panel outward
to the right.
NOTE:
—
To install a quick fastener, push its pin
back so that it will protrude from the
fastener head, then insert the fastener
and push the protruding pin in until it is
flush with the fastener head.
The fuse box, which contains the fuses
for the individual circuits, is located in-
side the storage compartment.
(See
page
3-14
for storage
compartment
cover removal and installation proce-
dures.)
PERIODIC MAINTENANCE AND MINOR REPAIR
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuses:
Main fuse:
Odometer fuse:
Ignition fuse:
Headlight fuse:
Carburetor heater fuse:
Signaling system fuse:
EC000103
CAUTION:
Do not use a fuse of a higher amper-
age
rating
than
recommended
to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
6-30
1. Quick fastener
2. Pin
4. If the fuse
immediately
blows
again,
have
a Yamaha
dealer
check the electrical system.
Advertisement
