DeWalt DCS577T2 Original Instructions Manual page 15

Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
E
WALT chargers. Charging battery packs other
D
E
than the designated D
WALT charger may make them burst or lead to
D
E
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built‑in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The following SKU(s) operate on a 54 volt battery pack: DCS577
These battery packs may be used: DCB546, DCB547, DCB548.
Refer to Technical Data for more information.
Package Contents
The package contains:
1 Hi‑torque circular saw
1 Circular saw blade
1 Blade wrench
1 Dust extraction port
2 Dust port screws
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
E
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
WALT batteries with a
E
Date Code Position (Fig. A)
The date code 22 , which also includes the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Trigger switch lock off
button
Trigger switch
2
3 Depth adjustment locking
lever
Lower blade guard
4
retracting lever
5 Foot plate
Lower blade guard
6
0˚ Kerf indicator
7
8 45˚ Kerf indicator
Bevel adjustment lever
9
Angle quadrant
10
Intended Use
These heavy‑duty circular saws are designed for professional
wood cutting applications. DO nOT use water feed attachments
with this saw. DO nOT use abrasive wheels or blades.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy‑duty saws are professional power tools.
Do not let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.

WARNING: Use only D
E
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack
EngliSh
11 Spindle lock button
Main handle
12
Auxiliary handle
13
14 Battery release button
Battery
15
Coarse adjustment
16
17 Fine adjustment
Kerf indicators
18
Blade clamping screw
19
20 Dust extraction port
Wrench
21
Date code
22
WALT battery packs and chargers.
15 is fully charged.
13