Table of Contents
Advertisement
Removing the Hinge Cover
Remove the screws from the hinge cover at the top
of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
with a flat-head screwdriver.
Removing the Freezer Door
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
to detach the water supply
a
line as shown.
NOTE
• Disassembling/Assembling the Water Lines
Collet
Tube
Insert line
b
c
d
2
Remove the screws from the water line cover
and detach the cover.
f
3
NOTE
• The number of wire harnesses may vary
• Ground wire is only present on some models.
4
• When lifting the hinge free of the latch, be
5
Clip
e
6
Pull out the water supply lines
the refrigerator. Disconnect all the wire
harnesses
. Unscrew the ground wire
h
depending on the model.
Rotate the hinge lever
Lift the top hinge
k
latch
.
l
CAUTION
careful that the door does not fall forward.
Free the hinge from the water lines and wire
harnesses and set it aside.
Lift the door from the bottom hinge pin
and place it, inside facing up, on a non-
scratching surface.
INSTALLATION
13
at the top of
g
.
i
counterclockwise.
j
free of the hinge lever
m
Advertisement
Table of Contents
