Turning Off The Projector - Panasonic PT-VX41 Operating Instructions Manual

Turning Off the Projector

1 ) Press the <ON/STAND-BY> button on the control
panel or on the remote control, and Power off?
appears on the screen.
2 ) Press the <ON/STAND-BY> button again to turn
off the projector. The <POWER> indicator starts
to blink red, and the cooling fans keep running.
At this time, you can unplug the AC power cord
even if the fans are still running.
3 ) When the projector has cooled down enough,
the <POWER> indicator stops blinking and you
can turn on the projecto
Note
Do not put the projector in a case before the projector is
z
cooled enough.
While the <POWER> indicator is blinking, the lamp is
z
being cooled down and the projector cannot be turned
on. Wait until the <POWER> indicator stops blinking to
turn on the projector again.
The projector can be turned on after the <POWER>
z
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-off.
Direct Power Off function
J
You can disconnect the power cord from the wall
outlet or turn off the breaker even during projection
without pressing the <ON/STAND-BY> button.
Note
The cooling fans will continue to rotate using internally
z
stored power.
When using the [Direct power Off] function, you can
z
not restart the projector immediately after the power is
disconnected. The lamp remains high temperature and
needs to be cooled, so it sometimes takes longer time
than usual for the lamp to light up again.
r.
Powering ON/OFF
Power off? disappears after 4 seconds.
27
ENGLISH -