Sony SDT-9000 Series User Manual page 10

-3 Install 5.25 ront pane
1 Push and open lid.
= 2 Holding the lid open with your finger,
push the front panel to catch the chassis
at A, B, C and D.
Note: Part E must locate on the pin.
1 Put A into the hole A to catch the side rai
(L).
2 Turn screw a first, and b next.
3 Put B into the hole B to catch the side rai
(R).
* 4 Turn screw C first, and d next.
Note: Use the mounting screws removed ir
the A-1. Other screws may damage
the drive mechanism.