Too Much Data Received; Transmission Error On Receive - IBM 3725 Manual

Too Much Data Received
This message only applies to the requester.
Cause: More data than expected was received (extra data is ignored). However
the received data
does
match the transmitted data.
Action:
• Press PF 1 to continue the test.
• If the error persists, contact the service representative.
Transmission E"or on Receive
Cause: The scanner indicated a transmission error occurred on receive.
Action:
1. Re-IPL the Link Test program.
2. Restart the test.
3. If the error persists, contact the service representative.
Notes:
1. The SCF, LCS, and SES are also displayed for this type of error.
2. Some errors of this type may disable the link. In this case, the PFl key is not
made available and the following message is displayed in the message area:
LINK DISABLED - LINK TEST FUNCTION CANCELED.
3-10
3725 Communication Controller Stand-Alone Link Tests
\......_
./
I
/