Switch Setting Connection The Ct-136 Board; 2-5-1. +5.22 V Adjustment - Sony RM-930 Service Manual

2-2. mI 7 2- 2-2. CONNECTOR
SBR, POE ARSEICBUCIAZ I -NAWVRORE Connection made with the connector panels during installation or
ARDY "(LTT WU ERRT SBI, FOFBICKIZ service, should be made with the connectors/complete cable
: e assemblies specified in the following list, or equivalent parts.
IAT -LSMSEREBALTR EV. : .
BRT S7—TUVMOIATS-ORRESSELVUEM
Parts No. , and name of connector with cable
1-560-069-11 PLUG, BNC
1-566-368-11 PLUG, 12P, MALE
1-562-356-11 PLUG, 12P, FEMALE
1473 —-ORRER
Connector function
MONITOR OUT (BNC)
CAMERA (12P, FEMALE)
DC IN (12P, MALE)
2-3. CT-136#MENRY FAUT 2-3. SWITCH SETTING ON THE CT-136 BOARD
* S9: ON/OFF, (OFFIZCNIfI CT ) Secor
JH, COAL vy FIZOFRIC LET. (The "OFF" position of S9 switch is CN1 side. )
IEDR Per — TO EMERG Se RIZONIC LET This switch usually set to "OFF". When using with
special cable, set to "ON".
2-4. CONNECTION
CCMC-12P05 cable
DC IN/REMOTE (12P)
CCDC-10/25 cable
DC IN (12P) DC OUT (4P) CAMERA (12P)
DXC-930/930P CMA-D1/D1CE
CAMERA ADAPTOR
2-5. ia BIA
2-5. ALIGNMENT
2-5-1. +5.22 Viase
2-5-1. +5.22 V ADJUSTMENT
JER: CT-136E1KOS32 5 SOPSOFFO IRF Io TSC ES
(SOMOFFILCNIAI CT. ) Note: S3 through S9 of switch on the CT-136 board should be
cae na. scp : Oran "OFF" condition. (The "OFF" position of S9 switch is
BUTE Se: FUIWVERVERA-Y* CNI side.)
Bae: @ RVI/CT-136251K Equipment: Digital voltmeter
UE AA: TP4 (GND: TPE) ; +5.22+0.01 V de Adjustment: @ RV1/CT-136 BOARD
Test point: TP4 (GND: TPE) ; +5.22+0.01 V de
—
O | 7)
TP2 RVI
TP4
TPS
Tel TPE
O @
CT-136 BOARD (COMPONENT SIDE)
2 = 2 RM-930 (J,E)