Advertisement
Pairing the Remote Control (only for Bluetooth remote control)
1. Pair the remote to the TV after you power it on for the first time. Keep the remote control
within 3 metres from the TV. Press and hold the [
same time at least 3 seconds to start pairing.
2. If the remote pairs successfully, a confirmation will display on the screen. If it does not
pair successfully, an unsuccessful message will display. Repeat step 1.
NOTES
If an unknown error occurred with the remote, then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is normal,
you can take out the batteries, press any key for 1~2 seconds, and insert them back. Then
the remote control will work normally.
The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control Operation Range
1. The remote control can work at a distance of up to 8
metres in front of the TV set.
2. The remote control angle: taking the remote sensor
as an apex, 6 metres away, its controlled horizontal
angle is within ±30°, while the vertical angle is
within ±15°.
3. The operating distance may vary depending on the
brightness of the room.
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
Remote Control
13
] button and [
] button at the
Advertisement
