Payne PG92ESAA Product Data page 2

DIMENSIONS (IN.)
FURNACE
H
PG92ESAA30040A 35
PG92ESAA36040B 35
PG92ESAA36060A 35
PG92ESAA42060B 35
PG92ESAA48080B 35
PG92ESAA48080C 35
PG92ESAA60100C 35
PG92ESAA60120D 35
Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.
†
‡ Heating CFM at factory default blower motor heating tap settings.
ESP --- External Static Pressure
FEATURES AND BENEFITS
The PG92ESAA gas furnaces are ENERGY STARR
only in U.S. South: AL, AZ, AR, CA, DC, DE, FL, GA, HI, KY,
LA, MD, MS, NV, NM, NC, OK, SC, TN, TX, VA.
HYBRID HEATR Dual Fuel System — This system can provide
more control over your monthly energy bills by automatically
selecting the most economical method of heating. With HYBRID
HEAT components, our system automatically switches between the
gas furnace and the electric heat pump as outside temperatures
change to maintain greater efficiency and comfort than with any
traditional single-source heating system. The heat pump also
delivers high-efficiency cooling in the summer.
Robust Igniter — Payne's unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Payne's tradition of
technology leadership and innovation in providing a reliable and
durable product.
FCT- -ECM Blower Motor — This basic fixed- -speeds, constant
torque (FCT) ECM, or electronically commutated motor, can
provide an efficiency enhancement for select Payne air conditioner
or heat pump systems. It uses less electrical power than its PSC
counterpart and also has a wider range of speeds.
Reliable Heat Exchanger Design — The aluminized steel, clam
shell primary heat exchanger was re- -engineered to achieve greater
efficiency out of a smaller size. The first two passes of the heat
exchanger are based on the current 80% product, a design with
more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.
The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.
4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all.
Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air — This furnace can be installed as a 2-pipe
(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.
Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.
RATED
CASING
HEATING
OUTPUT†
UPFLOW/
D W BTUH
HORIZON-
29.5 14.2 37,000 92.1%
29.5 17.5 37,000 92.1%
29.5 14.2 56,000 92.1%
29.5 17.5 56,000 92.1%
29.5 17.5 75,000 92.1%
29.5 21.0 75,000 92.1%
29.5 21.0 93,000 92.1%
29.5 24.0 111,000 92.1%
qualified
HEATING AIRFLOW
AFUE
ENERGY
STARr
Heating
DOWN-
FLOW
TAL
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
92.1% SOUTH
Insulated Casing — Foil-faced insulation in the heat exchanger
section of the casing minimizes heat loss.
Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.
Bottom Closure — Factory-installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.
Blower Access Panel Switch — Automatically shuts off 115-v
power to furnace whenever blower access panel is opened.
Quality Registration — Our furnaces are engineered and
manufactured under an ISO 9001 registered quality system.
Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory- -shipped for use with natural gas. A CSA listed gas
conversion kit is required to convert furnace for use with propane
gas. The efficiency is AHRI efficiency rating certified.
2
COOLING
CFM
@ 0.5 ESP
Heating
(in. W.C.)
ESP
CFM
(in. W.C.)
765 0.10 985
740 0.10 985
1100 0.12 1035
1000 0.15 1190
1350 0.15 1370
1460 0.15 1815
1675 0.20 1855
1735 0.20 1800
MOTOR
HP
SPEED
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4