Table of Contents
Advertisement
4-3. Factory Mode Adjustments
4-3-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
INFO
MENU
- If you have Factory remote - control
PICTURE ON
- The buttons are active in the service mode.
1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left
Arrow Right, Menu, Enter, Number Key(0~9)
2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -,
4-3-2 How to Access Service Mode
Using the Customer Remote
1.
Turn the power off and set to stand-by mode
2.
Press the remote buttons in this order; POWER OFF - INFO - MENU - MUTE - POWER ON to turn the set on.
3.
The set turns on and enters service mode. This may take approximately 20 seconds.
4.
Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5.
Initial SERVICE MODE DISPLAY State
Mode: CDTV . RES : 480I
Option
Control
SVC
Expert
ADC/WB
Advanced
6.
Buttons operations withn Service Mode
Menu
Direction Keys
/
Direction Keys
/
Source
MUTE
Power on
INFO
FACTORY
Menu, TV/VIDEO(Enter)
T-VALDEUC-XXXX
T-VALDEUS-XXXX
EDID SUCCESS
CALIB : AV O COMP O PC O HDMI O
Option : xxxx xxxx xxxx
T-VALDEU-0101
DTP-SP-VAL-1098
RFS : 61-1G-62
0000-00-00
READING : XXXX
Type : 32D1UF0E
Model : UE32C6620
MAC SUCCESS
CIP SUCCESS LOCK X
Factory Data Ver : XXX
EERC Version : XXXX
DTP-AP-COMP-XXX-XX-XXXX
DTP-HIIG-XXXX-XX
DTP-BP-XXXX-XX
Date of purchase : XX/XX/XXXX
Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase / Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
4. Troubleshooting
4-29
Advertisement
Table of Contents
