Samsung UA40C6200UF Service Manual page 31

2. Product specifications
Advanced Features
Call Arrival Alarm
If a call arrives while you are watching TV, the alarm
window appears.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
✎
You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎
Some special characters may be displayed as
blank or broken characters.
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN
window appears, the media contents are not played.
✎
NOTE
x
If the media function executes for the first time, the
warning popup window appears.
x
To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
x
Contents may not be played on your TV depending
on their resolution and format.
x
ENTERE and ◄ / ► buttons may not work
The
depending on the type of media content.
x
Using the mobile device, you can control the media
playing. For details, refer to each mobile's user's
guide.
x
When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV's Media Play menu
automatically changes. For more detail information,
refer to "Media Play".
44
English
2-28
or EXIT button when the alarm
Using ScreenShare Function
Screenshare displays the same web page as provide in
mobile. Using ScreenShare, you can open the various
contents saved in a mobile phone. For example, the image
on the right displays an access page for contents from a
mobile. You can read the mobile's various files and view the
phone book and calender on the TV. Also, in phone book,
you can make a call to other person, or can send to SMS.
✎
In Samsung mobile, ScreenShare must be installed and
the supporting application must be executed; then you
can use the ScreenShare function.
✎
Available buttons on your remote control may vary for
each page.
✎
Doc Viewer can read files in doc format, but cannot
modify them.
✎
The screen display may differ depending on the
connected device.
RUIS (when you see DTV)
Before you can use this feature, connect to a mobile phone
that supports RUIC (Remote User Interface Client). When
operating the TV with your mobile phone, only the POWER,
y, z and MUTE
✎
Even if you keep pressing down on a control button
(channel or volume) on the mobile phone the value will
only go up or down by one unit.
buttons are supported.
1/20/2010 12:32:19 PM