Advertisement
Available languages
Available languages
■
INSTALLATIONS
Suspended installation
When installing the unit in the trunk below the
package tray, observe the following.
• Select the mounting location carefully so that
Caution
Before drilling the holes, make sure that there is
nothing on the other side of the mounting surface.
2 Making holes
2 Completion
Tapping screws are not supplied.
Slanted installation
Note on the brackets (a)
\
Be sure to set the
To save installation space, you can place the
\15>\
mounting
angle
brackets © inside out, as illustrated below.
setting levers to the
457
45° Position-
Advertisement
