Table of Contents
Advertisement
Hotel Logo
Hotel Logo is a function that shows picture image which represents hotel during power on procedure.
- Hotel Logo will be in hotel option menu in both Standalone and Interactive mode.
- Lower menus will be enabled when hotel Logo option is on.
- Hotel Logo will be displayed if there is logo image which is already stored in memory and hotel logo option is
on during power on procedure.
- Hotel Logo will not be displayed when Hotel Logo option is off even if logo image exists.
Hotel Logo
- This option is to decide if hotel logo image will be displayed or not.
Hotel Logo DL
- This option is to download logo image to memory.
- Download the Logo File from PC to USB.
Logo File Format
- Only jpeg format is supported and the File name should be "Samsung.jpg".
- File size must be under 256Kbytes.
- Maximum resolution is 1920 * 1080.
- Connect the USB to TV and press Enter key.
- "Wait" message will be displayed during copying image to TV.
- "Completed" message will be displayed when the copy operation was finished successfully.
- "Failed" message will be displayed when the copy operation was finished unsuccessfully.
- "No USB" message will be displayed when any USB is not connected.
- "No File" message will be displayed when there is no file to copy in USB.
Logo Display Time
This option is to decide Logo display time.
3 sec / 5 sec / 7sec
4. Troubleshooting
4-55
Advertisement
Table of Contents
