Samsung LA22B450C4H Service Manual page 243

List of SI Vendors for Compatible Data Cables Supplied with the TV
- Refer to the code label on the data cables.
Warning
When you use the DC power output jack, you have to check the standard output power of STB(SBB) and you should use
the DC power within the standard output(5Vdc/2.5A, 12Vdc/1.5A).
- For 5V SBB, SBB load current must not exceed 2.5A.
- For 12V SBB, SBB load current must not exceed 1.5A.
- The initial output is 5V.
- For 12V SBB, you have to change the output voltage to 12V in order to use the power.
Changing the Output Voltage
1. Press the POWER button.
- The TV is powered on.
2. Press the following remote control buttons in order.
INFO MEMU
- The Hotel Option menu appears.
3. Press the ▲ or ▼ button to select "DC Power Output".
Press the ◄ or ►button to select "12V" or "5V".
4. Plug out and then plug in the power cord again.
- The voltage change is applied when you turn
the TV on again after changing the Factory
Option setting.
SI Vendor
Other Vendors
MagiLink
MovieLink
0 1
Calibration
BN39-00864A
BN39-01110B
BN39-01134B
EXIT
4. Troubleshooting
4-47