Gigabyte Z590 GAMING X AX User Manual page 32

Table of Contents

Advertisement

& Memory Odd Ratio (100/133 or 200/266)
Enabled allows Qclk to run in odd frequency. (Default: Auto)
& Gear Mode
(Note)
Allows you to improve the maximum OC frequency potential. (Default: Auto)
ƒ Advanced Memory Settings
& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
& Memory Boot Mode
Provides memory detection and training methods.
Auto
Lets the BIOS automatically configure this setting. (Default)
The BIOS automatically performs memory training. Please note that if the system
Normal
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
S kip memory detection and training in some specific criteria for faster memory
Enable Fast Boot
boot.
Detect and train memory at every single boot.
Disable Fast Boot
& Realtime Memory Timing
Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto)
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal
(basic performance), Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default:
Auto)
& Memory Channel Detection Message
Allows you to determine whether to show an alert message when the memory is not installed in the optimal
memory channel. (Default: Enabled)
ƒ SPD Info
Displays information on the installed memory.
(Note)
This item is present only when you install a CPU and a memory module that support this feature.
(Note)
- 32 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z590 gaming x

Table of Contents