Table of Contents
Advertisement
USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices.
USB 3.2 Gen 2 Type-A Port (Red) (Q-Flash Plus Port)
The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specification and is compatible to the USB 3.2 Gen 1
and USB 2.0 specification. Use this port for USB devices. Before using Q-Flash Plus
insert the USB flash drive into this port first.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Activity LED
Speed LED
LAN Port
Center/Subwoofer Speaker Out (Orange)
Use this audio jack to connect center/subwoofer speakers.
Rear Speaker Out (Black)
Use this audio jack to connect rear speakers.
Side Speaker Out (Gray)
Use this audio jack to connect side speakers.
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack.
Mic In (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Center/Subwoofer Speaker Out
Rear Speaker Out
Side Speaker Out
Line In
Line Out/Front Speaker Out
Mic In
You can change the functionality of an audio jack using the audio software.
(Note)
To enable the Q-Flash Plus function please visit the "Unique Features" webpage of GIGABYTE's website.
Please visit GIGABYTE's website for details on configuring the audio software.
Connection/Speed LED:
Activity LED:
State
Description
Orange
2.5 Gbps data rate
Green
1 Gbps data rate
Off
100 Mbps data rate
Headphone/
4-channel
2-channel
a
- 12 -
(Note)
State
Description
Blinking
Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
5.1-channel
a
a
a
a
a
, make sure to
7.1-channel
a
a
a
a
Advertisement
Table of Contents
