Getting Started - Paradyne 6310 Installation Instructions Manual

Getting Started

Before beginning your modem's installation, make sure that you have all the equipment
that you need.
Package Checklist
Verify that your package contains the following:
Hotwire 6310 ReachDSL v1 Modem
DSL interface cable with RJ11 connectors
Power cord with power transformer
Be sure to register your warranty at www.paradyne.com/warranty.
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
Standard RJ11 (or RJ14) wall jack for the ReachDSL modem cabling.
Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An
Ethernet straight-through or crossover cable is used.
— Refer to
Ethernet installation details.
— Refer to
cable pin assignments.
Installing the Hotwire 6310 ReachDSL v1 Modem
Cables & Connectors
on page 11 for ReachDSL modem and Ethernet
4
on page 5 for