LG DLHC6702 Series Owner's Manual page 39

en-us_main.book.book Page 39 Monday, March 18, 2024 8:16 AM
• Remove the small filter at the base by
sliding it out of the grooves on each side.
2
Use your fingers to get most of the lint off the
filters. To clean off residual lint, use a vacuum
cleaner or rinse under running water.
• The filters must be completely dry before
using or they could cause an unpleasant
odor.
CAUTION
• Do not tap the large inner filter repeatedly as the
built-in magnet may dislodge and cause a
malfunction.
3
After drying both inner filters completely,
reassemble the small filter by sliding the tabs
at each side into the grooves on the large
filter. Close the filter assembly by folding the
sides back together and snapping them
closed in the center.
• Ensure the left and right sides of the inner
filter assembly are closed properly.
4
Insert the inner filter assembly into the outer
filter.
Cleaning the Outer Filter
1
Remove the dust or lint around the filter inlet.
CAUTION
• If the lint drops into the filter inlet, it may affect
the drying performance and increase drying
time.
2
Pull out the outer filter.
3
Remove the inner filter.
4
Open the outer filter by grasping the top edge
and unfolding the sides.
5
Remove the residual lint with a vacuum
cleaner or by washing under running water.
• If washed, allow the filter to dry completely
before use. Failure to do so may cause an
odor.
CAUTION
• Do not tap the filter repeatedly as the built in
magnet may dislodge and cause a malfunction.
6
Reassemble the filters and reinsert them.
CAUTION
• Do not load or remove any clothes when the lint
filter is not in place. The clothes can drop into
the filter inlet and may cause the appliance to
malfunction.
• For best results, always use all 3 parts of the 3-
piece filter.
MAINTENANCE 39