Samsung WA19A8376G Series User Manual page 39

Problem
Vibrates excessively or
makes noise.
Stops.
The ECO TUB CLEAN alarm
does not turn off.
Untitled-1 39
• Make sure the washing machine is set on a level floor. If the floor is
not level, use the levelling feet to adjust the washing machine.
• Make sure the washing machine is not contacting any other object.
• Make sure the laundry load is balanced.
• Make sure the laundry is spread evenly in the washing machine.
Spread out the laundry evenly and start again.
• Make sure the space around the washing machine is free of objects.
• Humming is produced normally during operation.
• Objects such as coins can cause noise. Remove these objects from
the washing machine after washing is complete.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door, and press or tap Hold to Start to start the washing
machine. For your safety, the washing machine will not spin unless
the door is closed.
• Before the washing machine starts to fill, it will make a series of
clicking noises to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait briefly and the
washing machine may start.
• Make sure the inlet hose screens at the taps are not clogged.
Periodically clean the screens.
• This problem occurs temporarily due to low voltages, and will be
solved when power recovers.
• When the machine is diagnosed to be cleaned, the ECO TUB CLEAN
indicator blinks for an hour. This recurs 6 consecutive times until
you run the ECO TUB CLEAN cycle. This is normal, and not a system
failure. To keep the tub clean, it is recommended to run the cycle
once every 1-3 months.
Action
English 39
2023-09-27 11:42:13