1-Needle 3-Thread Overlocking - JUKI MO-3500 Instruction Manual

Practical Sewing - Overlock

1-needle 3-thread overlocking

Be sure to turn OFF the pow-
CAUTION
er switch before removing or
attaching the needle.
For wrapped overlocking with the right needle
(3 to 5.5 mm in width)
1. Remove the left needle. (Refer to page 15)
2. Set the stitch changeover knob to "B".
3. Thread the upper looper, lower looper and right needle.
(Refer to pages 25 to 27)
Right Upper Lower
needle looper looper
thread thread thread
Left
needle
thread
10
For wrapped overlocking with the left needle
(5 to 7.5 mm in width)
1. Remove the right needle. (Refer to page 15)
2. Set the stitch changeover knob to "A".
3. Thread the upper looper, lower looper and left needle.
(Refer to pages 25, 26 and 28)
Upper Lower
looper looper
thread thread
10
32