Advertisement
operating your refrigerator
DISASSEMBLY AND CLEAN THE PARTS
• In order to ensure safety, pull out the power plug with a dry hand before cleaning.
• Don't dismantle parts by force; or they may be damaged. After cleaning, they will be
CAUTION
assembled in reverse order.
• Don't reach your hands to bottom of the Refrigerator; otherwise you may be injured by
metal angles.
• Wipe with a soft cloth dipped with neutral detergent, and then dry with a clean and soft
cloth. Don't clean the Refrigerator with putty-powder, petroleum, benzene, hydrochloric
acid, hot water or rough brush; otherwise it may be damaged and corroded.
•
After cleaning, please check if the power line is damaged or becomes damp and if the plug is
too hot. If no problem, it can be plugged in.
•
Before plugging in, clean every side of electric parts, and wipe the damp left after cleaning
with a soft cloth or sponge, so as to prevent water or other liquid from being remained in
WARNING
electric parts and avoid electric shock.
1. Disassembly and clean of shelf and foldable shelf
• Lift interior of the shelf and pull it out (exterior of
the splitter plate moves up-dip lightly), and then
rotate downwards to take out the shelf;
• Steps to take out foldable shelf:
1.
Lift front of the foldable shelf and Iet the rear
part faII;
2. Push it to full extension;
3. Hold forepart of the overlapping shelf, and lift
to take it out.
• Wash shelf and foldable shelf with clean water,
wipe with a dry and soft cloth; assemble shelf
and foldable shelf in reverse order.
1ÿLift front of the foldable shelf and let the rear part fall.
2. Disassembly and clean of dressing case and bottle holder
• Hold the dressing case and bottle holder tightly with one hand, knock
upwards from bottom with the other hand to take them out;
• Rinse with clean water, and then wipe with a dry and soft cloth;
Assemble then in reverse order.
20_ operating
Advertisement
