Table of Contents
Advertisement
Pressure Relief Procedure
6.
Turn prime valve down. Put drain tube in
a pail. Leave prime valve in the down
(drain) position until you are ready to
spray again.
7.
If you suspect the spray tip or hose is
clogged or that pressure has not been
fully relieved:
10
a.
b.
c.
Trigger Lock
Always engage the trigger lock when sprayer
is stopped to prevent the gun from being
triggered accidentally by hand or if dropped
or bumped.
ti25289a
VERY SLOWLY loosen the tip
guard retaining nut or the hose end
coupling to relieve pressure
gradually.
Loosen the nut or coupling
completely.
Clear hose or tip obstruction.
ti25198a
334649F
Advertisement
Table of Contents
