Table of Contents
Advertisement
3
Using the tweezers, lift up on the separator groove of the top speaker carefully, and
separate it from the main board.
Be careful not to damage the PBA.
4
Check the black screw and the silver screw at the 2 different points of camera frame
and remove them using a cross-head screwdriver.
Be careful to fasten the black screw on the right position when assembling.
•
When removing the screws, be careful not to damage the camera lens and PBA.
•
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
Black screw
Silver screw
Disassembly and Assembly
79
Advertisement
Table of Contents
