Playing Tapes - Zenith VRA423 Operating Manual

P A G E 2 4 O P E R AT I O N

Playing Tapes

This page
explains the
basics of
Automatic Playback (No Safety Tab)
playing tapes
1. Tape playback begins automatically, if the safe-
in your VCR.
ty tab is removed from the cassette case. For
example, most rental movies have no safety
tab. Simply insert the prerecorded VHS cassette
into the VCR. Power turns on and playback
begins.
2. Select the channel 3 or 4 at the TV. Or, select
the TV's AUX (Auxiliary) source to see the pic-
ture, if you are using the A/V jacks.
Manual Playback (Has Safety Tab)
1. Press POWER to turn VCR on.
2. Insert a prerecorded VHS cassette into the VCR.
3. Press PLAY to begin playback.
4. Select the channel 3 or 4 at the TV. Or, select
the TV's AUX (Auxiliary) source to see the
picture, if you are using the A/V jacks.
Unloading the Cassette from the VCR
1. Press STOP if the tape is playing.
2. Press STOP/EJECT at the VCR until the cassette
is ejected.
Note:
This VCR records only in SP and EP speeds. Your
VCR sets the playback speed automatically to the
speed used to record the tape.
(Continued on next page)
Cassette
Length (Standard Play) (Long Play) (Extended Play)
T-30
T-60
T-120
T-160
power stop/eject
VCR's Controls
Cassette
Safety Tab
Shown in
Place
power
cbl/
program
vcr dbs tv
POWER
ch
eject
vol vol
ch
enter
u
rew play f fwd
PLAY
rec/itr
1 2 3
STOP
4 5 6
7 8 9
tv/vcr cm skip
0
TV/VCR
vcr+ adj
sel menu quit/cc
sel memory sp/ep
VHS Cassette Playback/Record Times
SP LP
30 Minutes 1 Hour
1 Hour 2 Hours
2 Hours 4 Hours
2 Hours, 5 Hours,
40 Minutes 20 Minutes
play
mute
EP
1 Hour,
30 Minutes
3 Hours
6 Hours
8 Hours