Zenith VRA423 Operating Manual page 12

P A G E 1 2 I N S TA L L AT I O N
Setup for VCR Plus+® recording
Before you
can record
Channel Mapping Worksheets
programs
with VCR
Channel found
Plus+®, you
via Auto Channel Station ID
must tell this
(TV Ch/Cable Ch)
VCR the
PlusCode TM
channels for
your area.
NOTE: Two PlusCode
numbers on the worksheet. After you have "mapped" the first number, press 0000 to show the
Double Map menu. Then enter the second number next to the first one.
Network or Published
PlusCode TM
Channel (VCR+ Ch)
TM channel numbers may be listed for certain networks or stations. Enter both
Channel found Network or
via Auto Channel Station ID
(TV Ch/Cable Ch)
Published
PlusCode TM
Channel (VCR+ Ch)