Source Id - Zenith R50V26 Operating Manual

Source ID

SEL
SETUP SPECIAL
Channel Labels
Source I D
Favorite Channels
Parental Control
Security Timer
Captions
Background
Menu To Menu Bar
Press select to set
SEL
SPECIAL
Source I.D.
IN 1
IN 3
Source List
Custom
Reset
Menu To Menu Bar
Choose preset names or create your own titles for the available picture/sound input
sources on your Entertainment Machine
1
Press MENU and the RIGHT/LEFT arrow button to
access the Special Menu.
2
Use the UP/DOWN arrow to select Source ID.
3
Press the RIGHT arrow button to activate the Source
ID option.
Use the RIGHT arrow button to choose In 1, In 2,
4
In 3, In 4, or In 5 (for front video jacks).
5
Use the UP/DOWN arrow buttons to go to Source List
to choose a pre-set Source identification, go to
Custom to create your own label, or pick Reset to
clear all labels.
6
If you chose Source List, press the RIGHT arrow button
206-3711
VIDEO AUDIO THEATER
To Exit
IN 2 IN 5
IN 4
To Exit
SEL
SPECIAL
Source I.D.
Menu To Menu Bar
Quit
Note: When you label Input 1, Input 2, etc. the TV
will automatically change to the source of the last
source labeled. To return to your original viewing
source, press the Source button on the remote
repeatedly until you see the picture you were orig-
inally watching.
Quit
to access the list and then use the UP/DOWN arrow
buttons to pick an ID from the list. Press SELECT to
save your choice.
7
If you wish to customize your source ID, go to Custom
(from Step 5), then press the RIGHT arrow button.
Cycle through the character choices using the
UP/DOWN buttons and cycle through the character
slots using the RIGHT arrow button. Press QUIT to
save your choice and exit.
Note: Use * for blank spaces.
8
To delete a Source ID, select Reset (from Step 5), then
press the SELECT button. You will be asked "Are You
Sure?" Press SELECT again and then press QUIT to save
and exit.
Press select to set
IN 1 IN 2 IN 5
IN 3 IN 4
VCR 1
Source List
CD
Custom
DVD
Reset
TAPE
LD
AUX
To Exit Quit
P A G E 3 1