Marantz SC-11S1 User Manual page 20

]
I [
CONNECTIONS
• Connection Example 2: Stereo Complete Bi-amp Connection
CD
The two amplifiers are connected by EG.B.S. for synchronized use. For EG.B.S. connection, connect with commercially available
monaural
Q
monaural miniplugs or stereo
Q
stereo miniplugs as described in F.C.B.S. (page. 26).
CIl
Set the 10 numbers as explained in HOW TO SET 10 NUMBERS (page. 27). When the 101 amplifier is operated, the 10 2
amplifier will operate in sync.
®
Connect the analog output of the GO player etc. to the L ch input jacks of both pre-amps.
As both pre-amps operate as monaural pre-amps in BI-AMP mode, do not use the R channel of the input jacks on these units.
• About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality. The low and mid/high
amplifiers are separated and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to a minimum. As a result, a wide sound environment can be reproduced.
Note:
Speaker systems connected using complete bi-amp connections must support bi-amp connections. Before connecting your
speakers, check in the instruction manual that came with the speakers or contact the manufacturer to confirm whether they
support bi-amp connection.
5C-1151 for L ch
@
• Set to 10 1
@
L ch for 5M-11 51
@
14
Remove
shorting bar
Speaker
L ch
Remove
shorting bar
@
@
To power outlet
~..:..----~- Set to BI-AMP
F.C.B.S.-
F.C.B.S.
+-
@
@