Marantz SC-11S1 User Manual page 14

I [
NAMES AND FUNCTIONS OF PARTS
( REAR PANEL
]
@
lDaranlZ
MODEL NO. SC·11S1
H
@
ACIN
@
PHONO GND Terminal
Connect the grounding wire from an analog record player
here.
@ PHONO Input Jacks
These jacks are for connecting to an analog record player.
Both MC and MM cartridges can be used, therefore set
the PHONO MC button
®
on the front panel according to
the type of cartridge you are using.
©
CD Input Jacks
These jacks are for connecting to the output jacks of a
Super Audio CD player, etc.
©
LINE 1/2 Input Jacks
These jacks are for connecting to the output jacks of a
tuner, DVD player, etc.
CE)
RECORDER 1/2 Input Jacks
These jacks are for connecting to the output jacks of a
tape deck or other type of recording device.
®
RECORDER 1/2 Output Jacks
These jacks are for connecting to the recording input jacks
of a tape deck etc.
©
PRE OUT Jacks
These jacks are for connecting to the input jacks of a
power amplifier.
s
C8> AC IN Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
CD
REMOTE POWER CONTROL Jack
(TRIGGER OUT)
This jack is for connecting to the TRIGGER IN jack of a
Marantz SM-11 S1 stereo powered amplifier used when
simultaneously switching the power of both devices
ON/OFF. For more information on REMOTE POWER
CONTROL, see page. 25.
Q)
AMP MODE Switch
STEREO: Set to use this unit as an ordinary stereo control
amplifier.
BI-AMP: Set to use this unit in complete bi-amp
connection.
For more information on BI-AMP MODE, see page. 24.
®
F.C.B.S. IN/OUT Jacks
These jacks are used to connect and synchronize up to
four amplifiers. For instructions on use and connections,
see F.C.B.S. (page. 26).
CD
BALANCED PRE OUT Jacks
These jacks are for connecting to the balanced input jacks
of a power amplifier.
r:0
BALANCED INPUT 1/2 Jacks
These jacks are for connecting to the balanced output
jacks of a Super Audio CD player, etc.