Remote Control Programming; Programming The Remote - Zenith IQB50M90W Operating Manual

Programming the Remote

Program your remote to work with a VCR or Cable Box.
The device you want to program
1
should be ON.
On the chart in this manual, find
2
the type of device you're program-
ming and then find the brand
name. Make a note of the two-
digit code—you'll need it soon.
Press and hold the PRG button.
3
It's recessed so it doesn't get
pushed accidentally. When the
indicator light turns on, you can
release the button.
Push the button with the name of
4
the device you're programming
(VCR or CABLE).
Using the number pad, enter the
5
two digit code found on the chart
in the Reference section.
Press DISPLAY to save the code
6
The indicator light will flash three
times and turn off if the code was
accepted.
Aim the remote at the device and
7
push the POWER button. It should
turn off. If not, try the other
codes listed and continue from
step three.
Not all devices will work with your
Zenith remote control.
206-3486-O
3
prg
Indicator Light
tv vcr
source
volume
5
1
4
7
0
menu
pip ch
record pause
rewind
power
7
cable help
flashbk mute
channel
volume
channel
2 3
5 6
8 9
6
display
quit
fav
ch
c.skip
timer
tv/vcr
play
f. fwd.
stop
4
P A G E 4 1