Table of Contents
Advertisement
2. Setting up the Display
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is
required for MPRT.
• AdaptiveSync and MPRT cannot be
enabled simultaneously.
• MPRT is to adjust brightness for
blur reduction, so cannot adjust
brightness and SmartImage while
MPRT is turned on.
• MPRT is gaming-optimized mode.
It is recommended to turn off
when you are not using the gaming
function.
3
Resolution notification
This display is designed for optimal
performance at its native resolution,
2560 X 1440 . When the display is
powered on at a different resolution, an
alert is displayed on screen: Use
2560 X 1440 for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
Physical Function
Tilt
20
Swivel
-35
9
-5
+35
Advertisement
Table of Contents
