Zenith C19A21D Operating Manual & Warranty page 26

Glossary
75 OHM RF CABLE
300 TO 75 OHM
ADAPTER
ADD
ANTENNA
AUTO PROGRAM
DELETE
INPUT
JACK
MONO SOUND
OUTPUT
PARENTAL CTL
SECOND AUDIO
PROGRAMMING/SAP available with some programming. Choosing SAP often refers to listening
SIGNAL
TUNER
P A G E 2 6
The wire that comes from an off-air antenna or cable service provider.
The end looks like a hex-shaped nut with a wire sticking through the
middle. It screws onto the threaded jack on the back of your TV.
A small device that connects a two-wire
75 ohm RF jack. They are usually about an inch long with two screws on
one end and a round opening with a wire sticking out on the other end.
This function lets you add new channels to list that you'll scroll through
when using your remote.
The physical receiver of television signals sent over the air. A large
metal piece of equipment does not always have to be visible for your
home to be using an antenna.
Auto Program has your Entertainment Machine automatically find all the
channels available in your area.
This function lets you remove channels that you don't watch from the
list you'll scroll through using your remote.
Refers to the jack that receives a signal from a TV, VCR or other
A/V device.
A connection on the back of a TV, VCR, or any other A/V device.
Mono (monaural) sound is one channel of sound. On more than one
speaker, all the speakers play the same audio.
Refers to the jack that sends a signal out of a VCR, DVD, or other
A/V device.
Restrict or censor a channel for a set length of time.
Second Audio Programming (SAP) is another, separate, audio channel
to audio in another language, such as Spanish or French.
Picture and sound traveling through cable, or on the air, to your
television screen.
Device that picks up the signal and turns them into
picture and sound.
300 ohm
antenna to a
2 0 6 - 3 5 8 5