Quick Start - Zenith A50M91W Operating Manual

Quick Start

Use pages 5-10 to hook up your
1
Entertainment Machine. Plug your
Entertainment Machine into a
120V 60Hz outlet and press the
Power button on the front panel.
The Quick Start screen will
instantly appear, with three steps
you should follow if you have not
yet done so.
Remove the back of the remote
2
and put in three AAA batteries.
Make sure batteries are properly
installed (check the +/– signs).
Click ENTER on your remote to
3
continue the setup process.
Your choice will be to pick 1 or 2
4
(Antenna or Cable), depending on
the type of input signal you have.
You will then be prompted to press
5
3 on your number pad. Your
Entertainment Machine will now
search for all available channels,
and store them in its memory.
The Quick Start menu appears
the first time you turn your
Entertainment Machine on, allowing
you to set your available channels
before going on to other options.
The Quick Start option only works
when the current source for the
Main picture is Antenna/Cable 1.
Once you have programmed the
channels for Antenna/Cable 1 this
option will not appear in the menu
for another source.
206-3360-O
4
back of remote
I N S TA L L AT I O N G E T T I N G S TA R T E D
cable
mode
surf
2
5
8
0
pip
play
rew ffwd
stop
P A G E 1 1
Have your
Entertainment
Machine
automatically
find and save
all the
channels
available to
you.
5
3