Table of Contents
Advertisement
REVERSING THE DOOR
13. Move the freezer door to the correct position next to
the cabinet and attach with the upper hinge. Screw
the hinge into place then fix with the hinge cover
(supplied).
upper hinge
14. Flip the corner cover by 180°and install it onto the left
corner of the door as shown.
15. Replace the door cover plate removed in Step 1, then
re-attach the upper hinge cover and the top cover
block to freezer body.
16. The door reversal is now complete.
10
REVERSING THE DOOR
INITIAL START-UP
Freezers work by transferring heat from the food inside to
the outside air. This operation makes the back and sides
of the freezer (particularly at start-up) feel warm – which
is normal.
A cooling coil is located behind the rear wall of the freezer
section. This coil cools and removes moisture from the air
inside.
hinge cover
Avoid placing food against the air vents in the freezer, as
it affects the efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer's interior. This is normal and will clear after a few
days. If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new freezer uses a variable-speed compressor,
along with other energy-efficient components, which may
make unusual sounds. These sounds simply indicate your
freezer is working how it should. They include:
•
Compressor running noises;
•
Air movement noise from the small fan motor;
•
A gurgling sound, similar to water boiling;
•
A popping noise, heard during automatic defrosting;
and
•
A clicking noise, prior to compressor start-up.
Advertisement
Table of Contents
