Page 8
3.Lift the door and place it on a padded The side in which the door opens can be surface to prevent scratching. changed from the left side (as supplied) to the right side, if the installation site allows for it. Tools you will need: 4.
Page 9
5. Place freezer flatwise,remove part ① 7. Set the door into its new place making and part ② . Loose screw ④ and then sure the pin enters the bushing at the remove part ③. lower frame section. 8. Replace the lid by fitting the upper ①...
Page 10
① Screw cover ② Screw ③ Handle part ① Handle cover ④ Cover-screw cap ② Screw Warning! ③ Handle part When changing the side at which the door ④ Cover-screw cap opens, the appliance must not be Note! connected to the mains. Remove plug Due to unceasing modification of our from the mains beforehand.
Page 12
To activate the Quick Freeze function, press To save energy, please avoid keeping the the Quick Freeze button until the icon light is door open for a long time when using the lit. The temperature is then set to -24°C (- appliance.
Page 13
FEATURES OF THE FREEZER Your appliance has the accessories as shown in the “Description of the appliance”. We recommend that you read through the below carefully before using the appliance to prevent damage to the product 1. Shelves in the Freezer Cabinet The glass shelves in the refrigerator can be taken out to adjust their position and to be cleaned.