Philips 170T4FS/74 User Manual page 80

VESA Mounting and Easy Wall Mounting
Foldable base available for easy wall mounting
Make sure the back cover is removed before mounting the monitor on the wall.
Smart tips
1. Use the full scale template to mark on the wall the horizontal distance (130 mm)
between the two mounting screws.
Notes:
- The surface for mounting area must be flat and larger than the pedestal.
- The wall must support a pull force of 10 kg for each screw.
2. At the locations marked, drill two holes in the wall, each 7 mm in diameter and 25
mm in depth.
3. Securely insert the plastic wall anchors (1) and then use the two screws (2) to
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/170T4/install/base.htm (2 of 5) [3/2/2004 3:46:45 PM]
1) Push down the head of monitor.
Make sure the back cover is
removed when folding the base.