Care And Cleaning; Cleaning The Blender And Accessories - KitchenAid 5KSBC1B0 Owner's Manual

PRODUCT USAGE (CONTINUED)
3.
Turn the Control Dial to your desired speed or program. See the "Blender Function Guide"
for more information.
4.
Flip the (Start/Stop) Toggle Switch up or down to begin operation of the Blender. The
Status Indicator Light will now be solid.
NOTE: If you select a Pre-Programmed Cycle, you will need to flip the
Toggle Switch to begin operation. The Blender will automatically stop running once the
cycle is complete.
5.
Use the Flex Edge Tamper accessory as needed for optimal blending performance.
Remove the Ingredient-Measuring Cap only, and leave the Lid in place. Stir or press
contents down towards the Blade. When you are finished, replace the Ingredient-
Measuring Cap on the Blender Jar.
6.
If desired, use the Pulse function for a momentary boost of speed while blending on the
variable speed settings.
Press and hold the
pulse.
NOTE: The Pulse function may also be used on its own as a separate blending function
while the Blender is in Standby mode. Pulse is not available when running a preset
programme.
7.
After blending, flip the
come to a complete stop before removing the Lid and pouring your blended ingredients.

CARE AND CLEANING

CLEANING THE BLENDER AND ACCESSORIES

Clean the Blender thoroughly after every use.
NOTE: Allow the appliance to cool completely before putting on or taking off parts, and before
cleaning the appliance. To avoid damaging the Blender, do not immerse the Blender Base or
Cord in water. To avoid scratching the Blender, do not use abrasive cleansers or scouring
pads.
1.
To clean the Blender Base and Cord: Unplug the Blender before cleaning. Wipe the Base
and the Cord with a warm, damp, soapy cloth; wipe clean with a damp cloth, and dry with a
soft cloth.
2.
Make sure to clean the Blender Jar, Lid, and Ingredient-Measuring Cap after each use.
Remove any remaining contents from the Blender Jar. Fill 1/3 of the Blender Jar with warm
water and add 1 drop of liquid detergent. Place the Lid on the Blender Jar, and make sure
the Blender Jar is fully in place on the Blender Base.
3.
Rotate the Control Dial to 30 seconds. Flip the
When the timer finishes, pour out the soapy water and rinse the Blender Jar with warm
water.
4.
The Blender Jar, Lid, Flex Edge Tamper, and Ingredient-Measuring Cap are dishwasher-
safe; the Flex Edge Tamper, Lid, and Ingredient- Measuring Cap should be placed in the
top rack of the dishwasher. If preferred, all parts may also be washed by hand with a damp
cloth and warm soapy water, and then rinsed with warm water and dried with a soft cloth.
(Pulse) Toggle Switch up for a faster pulse, or down for a slower
(Start/Stop) Toggle Switch up or down. Allow the Blender to
(Start/Stop) Toggle Switch up or down.
(Start/Stop)
7