Selecting Rating Level And Password - Zenith DVD2381 Operating Manual

Selecting rating level and password (Cont'd)
power
dvd vcr catv tv
menu return
display
title
ch
select /
vol
enter
ch
skip
play
1
setup subtitle audio
repeat a - b random
clear
slow/scan
rev
To clear your 4-digit password
If you forget your password, to clear the
current password, follow the procedure below.
1
Press SETUP.
The SETUP menu is displayed.
2
Enter 6-digit number "210499" by
pressing number buttons.
The 4-digit password is cleared. "P CLr"
appears on the display.
3
Enter a new password.
Refer to "Setting your password" section on the
right.
Setting your password (DVD only)
If you change the rating level to "7" or lower, you must enter a
4-digit "password" to prevent playback of discs with higher rat-
open / close
ings.
1
tv input
2, 3
vol
skip
2, 3
program
angle
2
fwd
3
To change/clear memorized password
1
2
3
INITIAL SETTINGS
At the SETUP screen, press
"Password" and press
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Input a 4-digit password and press
SELECT/ENTER.
Example : 1234
Do not forget your password.
Input the 4-digit password again and press
SELECT/ENTER to verify.
Setting is finished.
The rating is locked. Any disc whose rating is higher than
the setting, cannot be played back unless the correct
password is entered.
At the SETUP screen, press
"Password" and press
Input your password and press
SELECT/ENTER.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
To change or clear your password, press
to select the "Change" or "Clear" and press
SELECT/ENTER.
To change the rating level/password, follow the steps on
page 38-39 again.
PAGE 39
E E
to select
G G
.
New
— — — —
E E to select
G G .
Change
Clear
D D E E
/