Enjoying Dolby Pro Logic Surround Sound - Zenith DVD2200 Operating Manual

Connecting to Optional Equipment

Enjoying Dolby Pro Logic Surround Sound

Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decod-
ing. If your A/V receiver has a Dolby Pro Logic decoder. Refer to the following connection diagram.
Connect one or two
rear speakers.
The output sound from
the rear speakers will
be monaural even if
you connect two rear
speakers.
With a receiver equipped with Dolby Digital (AC-3)
Connect the equipment the same way as described in "Enjoying Dolby Digital (AC-3) Sound" on the previous page. Refer
to that receiver's owner's manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the coaxial digital audio jack of
this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hear-
ing as well as the speakers. (Refer to "Selecting Digital Audio Output" on page 38.)
To VIDEO OUT
Video cable
Connection example
Amplifier equipped
with Dolby Pro
Logic Surround
To video input
Front
speaker
(left)
Rear speaker
(left)
CONNECTIONS
AUDIO OUT
1 2
L
R
DIGITAL
S-VIDEO
OUT
OUT
VIDEO
OUT
To ANALOG
AUDIO OUT
Audio cable
To audio input
Center speaker
TV
PAGE 15
Front
speaker
(right)
Rear speaker
(right)