Table of Contents
Advertisement
PAGE 16
CONNECTIONS
Connecting to Optional Audio System
Enjoying Dolby Pro Logic Surround Sound
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decod-
ing. If your A/V receiver has a Dolby Pro Logic decoder. Refer to the following connection diagram.
Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
Connection example
With a receiver equipped with Dolby Digital (AC-3)
Connect the equipment the same way as described in "Enjoying Dolby Digital (AC-3) Sound" on the previous page. Refer
to that receiver's owner's manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL AUDIO jack of this
DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as
well as the speakers. (Refer to "Selecting Digital Audio Output" on page 37.)
DIGITAL
AUDIO
OUT
OUT2
COAXIAL
L
DIGITAL
OUT
R
S-VIDEO
OPTICAL
OUT
To VIDEO OUT
Video cable
Receiver equipped
with Dolby Pro
Logic Surround
To video input
Front
speaker
(left)
Rear speaker
(left)
COMPONENT
AUDIO
VIDEO OUT
OUT1
Pb
L
Pr
R
Y
VIDEO
OUT
To AUDIO OUT
Audio cable
To audio input
Center speaker
TV
Rear speaker
(right)
Front
speaker
(right)
Advertisement
Table of Contents
