Basic Operations; Basic Playback - Zenith DVC2515 Operating Manual

PAGE 17 BASIC OPERATION

Basic Playback

This section shows you the basics on how to play back a DVD video disc.
random repeat clear
disc select
1 2 3 4 5
power
1 power
setup title menu
zoom marker search
select/
enter
stop play pause/step
scan
slow skip
clear
audio subtitle
repeat
program
disc skip
Preparations
menu search
/ skip/scan / menu select/enter
disc skip
play pause step / stop
disc exchange
open close /
3
open/close
2, 4
sound
angle
a-b
random
When you want to play back DVD video discs, turn on the TV and
select the video input source connected to the DVD player.
When you want to enjoy the sound of DVD video discs or audio
CDs from the audio system, turn on the audio system and select
the input source connected to the DVD player.
For connection details, see pages 12 through 16.
Set the playback picture size according to the aspect ratio of the
connected TV at the SETUP menu (TV Aspect).
If you do not have the necessary equipment to enjoy Dolby Digital
(AC-3) sound, set the Digital Audio Output at the SETUP menu to
"PCM".
Press POWER.
1
The DVD player turns on and the power indicator lights
up.
Press OPEN/CLOSE.
2
The disc tray opens.
You can open the disc tray by pressing this button even if the
DVD player is in standby mode.
Place a disc on the disc tray with the
3
playback side down.
There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide, it
may damage the disc and cause the DVD player to malfunction.
Do not place anything except 3" discs or 5" discs on the disc tray.
Discs can be loaded one at a time by pressing DISC SKIP or
DISC SELECT (1 - 5) to rotate the carousel.
Caution: Do not touch the loading drawer and carousel
while they are in motion, and do not attempt to rotate
the carousel by hand; doing so could result in incorrect
operation of the player and/or damage to the discs.
Press OPEN/CLOSE to close the loading
4
drawer.
The disc on the tray 1 is ready to be played back.
Playback may begin automatically depending on some
DVDs.
If no disc is loaded on the disc tray 1, select another
disc by following step 5.
Do not close the loading drawer by hand.
If the disc is placed in upside down (and it is a single sided
disc), "NO DISC" or "DISC ERROR" appears on the TV
screen.
CD DVD
1
2 5
3 4
Operating status indicator
If you insert an audio CD, the CD indicator lights up in the DVD
display. The title number does not appear.
After playing back all of the chapters in the title, the DVD player
automatically stops and returns to the menu screen.
TITLE CHP/TRK PROG. RANDOM ALL A B