Table of Contents
Advertisement
With the proper audio mode
setting, your VCR can:
1) record and playback an MTS stereo
broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural
|
|
|
|
{
|
|
i
y
|
1
E
is ышы
ездш
broadcast (main language) or Second
Audio Program (second language) on
the Hi-Fi tracks for better quality
monaural sound.
3) playback non Hi-Fi tapes in monaural.
CN
NOTES
МА
• In order to listen to Hi-Fi stereo playback,
the VCR AUDIO (L/R) jacks must be
connected to a stereo TV or stereo amp
and speakers.
* When adjusting the tracking during
!
i
|
A «Q5 obo
зше
ч ы
bep
N i e
жыйды
* When purchasing or
renting prerecorded tapes,
remember that only those
recorded in Hi-Fi stereo will
play back with true stereo
sound. Standard stereo
tapes will play back with
monaural sound.
(See previous page.)
playback, the Hi-Fi audio sound may revert
to normal audio sound. This is normal.
‚ * There may be a difference in audio level
|
between Hi-Fi and normal audio playback.
Selecting the Audio Mode for Recording
Select the type of broadcast and sound track you wish to record.
E]
Push SAPHi-Fi repeatedly
| SAP/Hi-Fi
TP
\
‚ (each press within 5
' ©
| seconds) to select the
Lo.
desired audio mode
(STEREO/SAP/MONO).
» Please refer to "Receivable
Broadcast Types" section on
previous page.
STEREO «€
SAP
MONO
* The currently selected
audio mode is indicated
with an arrow.
Do a recording.
See the "Record On a Tape" section on page 16.
Selecting
the Audio Mode for Playback
|
; seconds) to select the
P
' desired audio mode
(HIFI/NORMAL ).
* Please select HIF! to listen to
your stereo recordings with
stereo sound or MONO for
monaural sound.
D Playback the tape.
See the "Playback a Tape" section on page 14.
* The currentiy selected
audio mode is indicated
with an arrow.
Spatializer Feature
This feature allows you to enhance the stereo sound so that it seems to
completely surround you.
Note: Your VCR needs to be hooked up to a stereo TV or stereo amp/receiver
with speakers (see page 22). For playback, tapes must be recorded in Hi-Fi
stereo. For TV viewing, programs must be broadcast in stereo.
i
1 Push SPATIALIZER
SPAQNLVFR- repeatedly to choose
|
' the desired setting.
E
* Each push will change the
display in the order shown.
Inc. SPATIALIZER, and the circle-in-square device are trademarks owned by
Desper Products, Inc.
SPATIALIZER
HIGH
SPATIALIZER
LOW
SPATIALIZER OFF
оа UE)
под
ЕЛ
To Select Audio Mode From Menu
1 Push MENU to display the menu.
REPEAT
PLAY
:
ВЕЕР
:
ER
: ОМ
INPUT SELECT
: TUNER
SET
AUDIO MODE
SELECT
; ROTATE
WHEEL
SET
: PUSH WHEEL
END
: PUSH MENU KEY
2 Rotate and push Wheel to select SET UP
VCR from menu.
З Rotate and push the Wheel to select SET AUDIO MODE.
4 Push the Wheel to set the desired audio for — | SET AUDIO move ----
listening or recording.
: STEREO
LAY
AUDIO
: Н!
* For recording, set to "STEREO", "SAP", or "MONO".
* For playback, set PLAY AUDIO to "Hi-Fi", or "МОМО".
SELECT
: ROTATE
WHEEL
5
SET
: PUSH WHEEL
Push MENU three times to exit this mode.
END: PUSH MENU KEY
Advertisement
Table of Contents
