Panasonic Omnivision VCRplus+ PV-4661 Operating Instructions Manual page 12

One Time VCR беш
MENU
WHEEL
CLEAR
CH UP
NUMBERED
keys
ADD/DELETE
100 Key
To Change On Screen Display Language
ае лано om МЕМ "---------*
1 Push MENU to display the menu.
SET UP VCA
SET CLOCK
2 Rotate the Wheel to select the
language selection item.
(English: LANGUAGE, Spanish: |$Е ЕТ : 36
IDIOMA, French: LANGUE). Ем:
ТУПЫЕ: ENGL! SH
ROTA ATE WHEEL
WHEEL
SH MENU K
3 Push the Wheel to change the language.
* Each Push wili change the language in the order shown.
"d English — Spanish —3 TAR
4 Push MENU to exit this mode.
To Add or Delete a Channel
CHANNEL 08 DELETED
or
ADOED
1 Select a channel using the
NUMBERED keys .
2 Push ADD/DLT to add or
delete the channel.
* To select a deleted channel, use the NUMBERED keys
on the remote control. Deleted channels мі! flash in the
Multi Function Display on the VCR when selected.
to a specific item.
(continued)
To Replace Channels in Memory
Example, if you have cabte installed, etc.
І Push MENU to display the menu. . SET UP ven
2 Use the Wheel to select i HR eae
SET UP CHANNEL from menu, [5:897 : Posa weet
and then to set your antenna (END: PUSH MENU KEY
system (TV or CATV).
--- SET UP CHANNEL ---
: САТУ
3 Rotate and push the Wheel to АЛО SET RUE
select and set AUTO SET. VCR Plus« CH SET UP
* To exit this mode, push MENU. | SELECT : ROTATE WHEEL
* If you use a cable box, turn оп | Evo : PUSH MENU KEY
us cable box and set it to the
BS channel in your time zone. 5
Á CHANNEL/ CLOCK AUTO SET
4 Push CH UP to start Channel е оа
Auto Set, LOCAL PBS CH THEN. .
* Auto Clock Set is always PLEASE PUSH CH UP KEY
pertormed when replaced
channels in memory.
To Set or Reset the Clock
In case the clock is wrong, or
a power failure occurred.
T UP YCR
UP CHANNEL
ID LOMA? LANGUE: ENGL | SH
SELECT : e WHEEL
SET Я
1 Push MENU to display the
menu.
2 Rotate and push the Wheel to:
(A) Select SET CLOCK
(B) Select MANUAL SET
(C) Set the date, time, and
D.S.T. (Daylight Saving
Time).
AUTO SET
: ROTATE WHEEL
> PUSH WHEEL
: PUSH MENU KEY
SELECT
SET
END
3 Push MENU twice to start the
clock and exit this mode.
BY ua ING WHEEL
PUSH CLEAR: : PUSH WHEEL»
TO START PUSH MENU KEY
When Using the 100 key
When selecting CATV channels 100 to 125 with the
NUMBERED keys, first push the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Push NUMBERED keys 100, then 2, then 5.
* This VCR will айы maintain its calendar up to Dec. 31, 2014, 11:59PM.
* Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR is hooked ир.
* By pushing the Wheel or CLEAR button repeatedly, you can skip forward or backward over correct entries and go directly |
И
1
!
l